New Session
       BOM File Needs Uploading..
       Paste Gerber File Needs Uploading..
       BOM Not Complete

Placement Review

Below is a diagram showing the part placement locations. The red text are the reference designators. The blue arrows indicate parts. The green areas are pads where paste will be applied. The short cross should be exactly centered over their respective pads. Orientation of polarized parts must be indicated on the silkscreen layer of your physical boards. There should be no extra parts. The only elements that should be visible in green are the smt pads and the board outline and the fiducials. You may upload a new versions of the cad files until you are satisfied after which you continue to the next step. Consult the FAQ for more information


(click to enlarge)